Friday, January 29 — Day 1

Gathered at Red Hat’s main office, we brainstormed in a manual ‘tag cloud’ kind of way.  Mel had us all take sticky notes, write upon them based upon a few words on the white board and then, stick them to said white board appropriately.  This got our minds going about what a FUDCon or FAD should be, why it was important and the things that could really be improved.  I felt very happy about the amount of ideas that were shared on these sticky notes.  it was quite cathartic to get out the things that always had bugged me or I thought needed improvement in our Events.  I have a few pictures of us doing this process, enjoy them.

After spending about 1.5 hours doing this and discussing it, we broke into separate groups, the FUDCon 2.0 folks (upstairs) and FUDCon Live folks, aka me, Yaakov, and the freeseer folks online (downstairs).  My main target was to get the freeseer application working with completely free software and build the AV Kit from components I had, plus the ones that Mel had purchased for this project.

After getting downstairs with Dennis Gilmore (he was my helper for the first hour), we quickly discovered that one component, the Epiphan vga2usb device, was not working.  After a bit of digging, we also discovered that it had a non-free driver and that it would likely not be easy to find a free driver alternative.  We did, however, attempt to build the binary they provided, but kept getting errors.  More on this later on (or in another post), so stay tuned.

I spent the next few hours trying to get everything else up and running, doing research to find a different alternative for video output from a VGA source to USB input.  heffer joined us on IRC and gave me some good links as to where I might look for a Scan Converter and a easyCAP device.  While a little lower quality, the Linux drivers for it are completely open and free, so I set out with a plan to find one in Raleigh.

At 4pm, Max and I headed out on the town, hunting down several items, including firewire PCMCIA adapters (for our miniDV camera) and the Scan Converter components.  We needed to get a screw driver and some other firewire adapter stuff too, we headed to CompUSA. Though normally I wouldn’t go there, but this CompUSA had actually been converted from a Tiger Direct, so I thought we had a chance.  After about 1.5 hours of failure, we ended up with two firewire cards and some audio cables, we headed off to see Avatar in 3D.

Saturday, January 30 — Day 2

After leaving Avatar, we discovered a nice big blanket of snow had come down in Raleigh.  Just 2-3 inches, and in Utah, we’d think nothing of this, but here it’s quite a bit different.  First off, North Carolina doesn’t seems to have the infrastructure, no plows or ice melt, to really deal with something like this kind of storm.  There were news reports of it on every station, the Governor called for a state of emergency, and I just thought it was odd.  Because of this, it was determined that we would not leave the hotel for Day 2 of the FAD.  Instead, we reserved a room in the hotel and worked from there.  Luckily, the hotels infrastructure, plus the Days Inn next door provided us with our networking needs, while Max stayed at his apartment and called in using Fedora Talk.

My work was to spend as much time with the FreeSeeR folks and do tons and tons of testing of their code, plus provide feedback and gstreamer pipelines to get us closer and closer to our eventual goal.  Thanh had spent a lot of time while we were at Avatar to turn FreeSeeR into an API.  He also altered the code to put the gui into a more sensible tool, with both Qt and Gtk implementations.

About half way through the day, I discovered that I had accidentally left my power adapter for my audio mixer in Max’s car (he was 15 minutes way with no snow and at least 25 with), essentially eliminating my high quality audio testing.  Luckily Chris Tyler had a headset with a microphone and Dennis Gilmore had a webcam we could use because the firewire cards were a bit flaky and kept crashing my kernel.

By the end of the night, with some tweaking by Dennis and I, we had FreeSeeR working with DV input, USB video input, 1/4″ audio input and were able to output to an ogg file with reasonable quality and consistency.  A lot of testing later, and we were able to determine that we still needed to tweak some of the code to provide for a better way to adjust audio and video settings prior to recording.  All in all, the FreeSeeR software is coming along very nicely.  Andrew Ross and Thanh Ha have been doing an amazing job and I really appreciate their help working on getting this working.  The new version of FUDCon Live thanks you as well, because without this, we won’t be able to provide our users with a good quality remote experience.

Sunday, January 31 — Day 3

The sun is shining, but for some reason, the roads are still not that clear.  Several cars are still having difficulty climbing the incline out of the Best Western to the main road, which is now melting, but still very snow covered.  Today, we discover that we’ve met one major part of our goals, the Fedora Pony has been created!!  We must thank Robyn Bergeron for creating, Frank, the Fedora Pwnie.  Now mind you, Francis is really her name, but she’s such a tomboy that, well, you just can’t call her that, she doesn’t enjoy it too much.  So we call her Frank.

In addition to our major goal above of a Pony, the FUDCon Live team has done some amazing work.  Yaakov has been working on the FUDCon Live document with Mel, while I was working with the FreeSeeR guys to get their git repo moved over to fedorahosted.org, which is awesome!  I’ve been given commit and sponsor rights to the repo, so we’ll start getting more developers involved right away.  Have a look at the screenshots of the GUI if you’d like to see what FreeSeeR can do.

Jon Stanley and I discussed the possibility of moving fedorahosted.org over to gitolite, and discovered that Jesse Keating has been experimenting with it himself, so this might be something we can do in the near future.  While we currently appear to use gitosis, gitolite gives us the ability to set ACLs on a particular branch, which then can help keep the master branch cleaner.  To help illustrate this, there’s a very great article on nvie.com which explains a git branching system which can really make development and commits very clean and easy to track.  Gitolite can help with this, so I’m going to be experimenting with it this coming week.

I spent the rest of the day writing up the AV Kit wiki page along with Mel.  I stubbed it out, and she added a big section regarding the modules in the AV Kit.  I then rewrote much of that to cover the two styles of AV Kit we’ll be building over the next month or two.  In fact, I plan to have one complete in time for the Marketing FAD in March, where they can use and test it out.  I really hope to get some good feedback on it and improve FreeSeeR some more using these upcoming events as testing grounds.

Currently, I’m on a plane which I didn’t think would take off tonight, headed home for Salt Lake City.  I’m excited to see my sweetie and get some much needed sleep.  As much as I enjoy hanging out with my Fedora friends and working on projects like this, it really wears me out.  I’m ecstatic at the amount of work we accomplished though, and am very appreciative to Paul, Jon, Chris, Denis, Dave, Mel and Max, plus all the folks online for their hard work this weekend.

FUDCon 2.0 is alive and kicking, FUDCon Live will make it just that much better.  Watch for upcoming posts in the near future regarding FreeSeeR and the Fedora AV Kit and how everything is going to work.

Cheers,

Herlo

6:12pm: In hotel room, snuggled up to Jennifer.  Still debating whether I’m going to sleep or just head to FUDPub.

6:15pm: Send Dave an SMS message that reads ‘be down in 10 minutes’.

6:31pm: Dave replies with SMS that reads ‘Hmmm gave up and left’.

6:32pm: Head down to the lobby to try to catch up.   Nobody there, so Jennifer and I head over to FUDPub.  By this time, hunger has taken over and I am less tired than hungry.

6:40pm: Arrive at Flat Top Johnny’s for FUDPub.  Proceed directly to the rear of the building in search of food.

6:42pm: Find food, pile it on my plate and head back to the front of the building.  The place is packed an hopping.  Lot’s of pool is being played and it sure looks like fun.

7:00pm: Our server takes our order for drinks and the party commences.  We sit down beside Mike McGrath, Jeroen van Meeuwen, Dave Nalley and a couple others as well.  Of course, we start talking a bit about Ambassador stuff and the barcamp overall.

7:30pm: About the time we’ve consumed a couple drinks and ordered food, the conversation gets good.  We’ve had a few others join us, Jared Smith, Kenny and Cade all come over and at this point we’ve basically taken over the table.

8:00pm: I’m feeling much better, have eaten a chicken sandwich and consumed a few more beverages.  At this point I’m very happy I didn’t stay at the hotel and sleep.  Jennifer and I are having fun with the rest of the group.

8:??pm: Not sure quite when it happened, but Mo Duffy decided to come by to take our pictures for the Fedora Picture Book.  It was at this time I was invited to do something, rather egged on by the table pounding.  I proceeded to the front of the restaurant to perform my now infamous moonwalk.  (Thanks to Ian Weller).

9:ISHpm: Played pool with Jennifer, Dave, Jared, Colby and others.  Spent a good hour playing pool and trying not to repeat a performance of my moonwalk.

10:30pm: Arrived at the hotel and discussed the video uploading hackfest.  It was decided we’d meet on the 3rd floor and hack for a while.

10:45pm: Met Chris Tyler and Matt Domsch along with Ian, Dave, Kenny and a few others and proceeded to render video.  I wanted to play with the syncing of the video with the audio recordings I obtained, but after several attempts, it was clearly not going to happen.

1:00am (Sunday): Because video takes a long time to render, I was still up tinkering with my rendering. About this time, Mo Duffy had sent links into #fudcon showing my dance moves.  Ian and others at the video hackfest decided this was a much better hackfest.  In the next hours, Ian had created an animated gif as well as an ogg video of my moonwalk to the tune of ‘Smooth Criminal’.  Each time I made a comment about it, the pure ridiculousness was raised another magnitude.

3:00am: After enduring enough of the video rendering and ‘Smooth Criminal’ in midi, I decided it was time to head up to the room.

3:10am: Because I hadn’t gone to bed at a reasonable hour to be useless for Sunday’s hackfest, I decided it would be a good idea to pack my bags.

3:25am: Decided that it wasn’t late enough to sleep, I started on and successfully got Moksha up and running with Luke’s demo data.  I can see how cool it will be to build Fedora-Event-Splash with a Moksha back end.  I was also thinking about an Ambassador Portal, probably somehing with statistics and updates when a user updates.  Could also show tracking of resources and other useful tools.

4:00am: Time for bed.  ZZZZzzzzzz ZZZZZZzzzzz

Streams will be available at http://stream.utos.org:8080, look for the links to be semi-descriptive.  We are also limiting the number of listeners per stream to 20 to make sure we get good streaming. We may increase this nearer the end of the day, especially for Paul’s address.

In addition, many of these same talks will be video recorded by the famous Chris Tyler and Matt Domsch, and others.  Their video recordings will be shared with the community shortly after FUDCon.

This should be really good.

If you are curious about the schedule, check the FUDCon F11 Wiki page to keep up on the latest sessions and locations.

Cheers,

Clint

In addition, Joe Brockmeier of OpenSUSE will also be keynoting and we’ve got quite a list of presenters on our website.  Our goal is to help open source grow in Utah, and by providing this conference once a year, we can help our local LUGs and open source leaders.  We have approximately 50 presentations, plus events and other fun stuff up our sleeve over this 3 day conference.

One of the great events returning this year is the Guru Labs Troubleshooting Challenge.  We hope to have this event bigger and better this year, with cash prizes for the winner(s).  There will be sign-ups available on Thursday morning at the registration booth and the contest will run all day Friday, crowning a winner Friday night!

Another great return from last year is KnowledgeBlue.  With opensourceTV, they’ll be recording the video for several of our presentations and keynotes.  They’ll be working just like last year (only better) to provide interviews as well with some of the leaders of the open source community.  We expect you all will enjoy the videos as they go up on youtube.  This year, they will focus on multiple angles and getting a good quality presentation from the presenters.

Lastly, I’d like to talk a little bit about Family Day at UTOSC, August 30, 2008.  If you take a look at the presentations on Saturday, you’ll notice a bit of a trend.  With a few exceptions, presentations are intended to help the family. Also, we are working on activities for the kiddies such as an OLPC, videos on MythTV, edubuntu, Fedora Electronics Lab demos and more in our try-it lab.  We’re also working to acquire a moon bounce and sumo suits (for the big kids).  Saturday looks to be a ton of fun.

NOTE: This doesn’t mean that we have enough family stuff, and in fact, we really don’t.  One thing I’d like to see, is a presentation on content filtering for the family.  Something like “Howto use Dan’s Guardian effectively” or a discussion of pfsense, smoothwall or other firewalling/filtering tools.  If you have a presentation you’d like to suggest in this area, please let me know by commenting or emailing me.

I hope to see many of you there as the cost is quite low at $70 and if you are LUG member, its only $35 until August 7 for the early bird pricing.  Read more on our website at http://2008.utosc.com or register directly with eventbrite at http://utosc2008.eventbrite.com.

See you all there.

Herlo

FUDCon F10, for me, was a time of realization.  Understanding what it is to get involved in projects that scratch that itch.  For providing services toward something I’m good at, into a larger community who could really take advantage of that service.  And while I am still feeling my way through the Fedora world, I think a few things are clearer now after reflecting on this last FUDCon.

I want to record and stream audio and video.

I’m thinking that along with the Fedora Talk project, I could configure and use tools to provide a non-interactive streaming server for certain events/presentations.  What I am thinking of here is things like FUDCon keynotes and sessions.  In fact, I plan to purchase a higher quality microphone / mixer combo to better record the audio at the source.

Video and screencasting in real-time seems a bit more of a challenge.  Putting that together with the streaming audio seems like a fun project and scratches several itches I’ve been experiencing lately.

I need to learn how build better RPMs

Spot taught a great session at FUDCon F9 in Raleigh about RPM packaging, and Rex Deiter talked this time about becoming a package maintainer.  I’ve got a few packages that I’d like to get into the fedora tree, and I think by the end of this year, that can happen.  I’m okay at packaging, but haven’t ever submitted a spec file to spot.  While I’m nervous about how ugly the first package will look, I’m also excited at the prospect of learning better and more efficient ways of building useful tools for the masses.

I think everyone should build their own spin of Fedora

After the 5+ hour session on Friday’s hackfest regarding the spins website and what the spins SIG has already accomplished, I’ve taken some initiative and started to create content to help the prospective spin enthusiast.  I’m a big fan of the Eee PC and am looking forward to purchasing the 901 in the winter.  Until then, I’m planning on helping improve the spin process so we don’t fail to release spins again.  The custom and official spins ‘built with Fedora’ can be so much more prolific if we just provide the right tools to build a spin.  It really should be nothing more than, here’s my kickstart, build me an iso.  This would of course have to follow the general standards for acceptable software.

The relationships (FUDBuddies) made at FUDCon are up my alley

I met Rex Dieter, Mo Duffy, Ray Strode, Dennis Gilmore and Ian Weller this time.  We had great conversations about the world and of course Fedora.  I also got to talk more to Toshio, Greg and J5 who I had met previously at FUDCon F9.  I indeed learned a bunch from Toshio about TurboGears too.  Its something I’ll treasure for releases to come.

To end this post, I’ve got some audio of the olpc session and paul’s keynote, as well as some photos I’ve posted around the interweb, enjoy.  Paul’s keynote will also be up on our new FedoraTV Miro channel, check it out!

Cheers,

Clint

Codec Buddy, with a little help from the Fedora and Fluendo development teams has grown into something that could be great. I see Codec Buddy really helping those who want to use and play non-free media sources from within Fedora. If you are currently running rawhide, you probably already know about this, but very soon, many other people will start to understand how Codec Buddy works as well.

One of the goals of the Fedora Project is to be free of any proprietary software. Though I don’t see that many people using Fedora without at least a few proprietary components, media codecs, drivers, etc. Maybe one day…we can always hope.

To that end, I am a big media buff. I regularly watch TV shows and movies that use proprietary codecs. As an example, most people don’t realize that using the reverse engineered DVD encoding provided by DVD Jon could be considered illegal. Fedora doesn’t want to be encumbered by these risks, and truthfully, I don’t blame them one bit. Considering that my backlog of mp3s and DVD rips will require an additional bit of software not normally included with Fedora, I think this is a great software solution. Give the user what they want without compromising the integrity of the project.

Codec Buddy is provided to help the average Joe understand the world of media formats. Its job was originally to provide a short description of why Fedora doesn’t include this in its distribution. Then point to where one might find more information about these formats. Codec Buddy has been altered a little, but attempts to accomplish the same thing using the Fluendo website.

Fluendo is the company that employs many of the individuals that work on the gstreamer project. Its quite a noble project, providing media codecs (installable formats) for many of the audio and video we like to use every day. Its great to have open source companies like Fluendo helping open source grow.

Codec Buddy works by launching a small application when someone tries to access a media codec not currently on the system. For instance, I’ve attempted to play a show I’ve downloaded.

Launch Totem

Open the file

Start the video

As the video attempts to play, a prompt appears, indicating the media isn’t supported. Codec buddy then provides a few options to enable playback for this particular media format.

The available items are MP3 Audio Decoder, MPEG Playback Bundle and MPEG4 Part 2 Video Decoder. By default only the MP3 Audio Decoder, which is also the only codec that will be installed without payment, is checked. The other two codecs are available for a small fee, which helps Fluendo to provide these codecs.

Clicking the “Get Selected” button will immediately start the download of the MP3 Audio Decoder (if it was selected).

A license agreement then appears, make sure to read this and if you agree, click Accept.

Once the agreement is complete, its time to purchase the remaining codecs. Choose Start Web Browser and in a few moments, the Fluendo website should appear. This should allow you to purchase the remaining codecs needed for the video I want to watch.

The Fluendo website has a good list of available codecs beyond the choices available in Codec Buddy.

The purchase will seem similar to many others on the web, add things to the cart, and pay.

Fluendo is a good start. I’m sure there will be many people interested in purchasing these codecs here. However, I believe however, that the biggest problem is that most people can get these codecs for free on Windows, Mac and even other Linux distributions. So far, the thing I feel is missing here is the explanation for why charge for these codecs and who benefits.

Fluendo is a great resource and provides some kick-ass codecs. If there is no explanation as to why we need to pay for something that one can get for free. Potential customers who don’t understand the reasoning behind it might go elsewhere, or worse even, choose another distro or operating system.

I love fedora for the freedom it gives me to choose my path. I love fedora for its focus on making sure things are free and open, both monetarily and in liberty. I love fedora for trying things like Codec Buddy, I want it to succeed. I hope that with a few suggestions, both fedora and Fluendo can make Codec Buddy the informational tool that it was originally intended.

Cheers,

Herlo